
Available to Order
Contact UsA 50-inch Sage planar line source over an array of eight high operating pressure woofers — 40 Hz to 20 kHz within 2 dB at 95 dB sensitivity.
Product Details
The L100 uses the same planar magnetic line source technology as the L75 and L150 at a more compact 50 inches, with an array of eight high operating pressure woofers behind it. Response runs 40 Hz to 20 kHz within 2 dB at 95 dB sensitivity.
Each channel is a two-cabinet system — the planar column and the woofer column installed adjacent to each other, within four or five inches, flanking a stud in an in-wall job. That is worth knowing at the framing stage rather than at the trim stage, because it changes what the wall has to accommodate.
At 50 inches it hides completely behind acoustically transparent screens, including the 2.35:1 formats a dedicated cinema is usually built around. It needs an SC-2 or SC-3 for DSP and outboard crossovers and three channels of amplification, which is the Sage Series trade: more system to design, and performance the passive alternatives cannot reach.
50-inch planar magnetic driver for mid and high frequencies
Array of eight high operating pressure woofers
40 Hz – 20 kHz, plus or minus 2 dB
95 dB / 1 W / 1 m
Planar section 4.5 ohms · woofer column 4 ohms
Three channels, with SC-2 or SC-3 required
Sage Series
True line source, in-wall (L100i) or on-wall (L100m)
50 inches
Eight high operating pressure woofers
40 Hz – 20 kHz ± 2 dB
95 dB / 1 W / 1 m
4.5 ohms
4 ohms
Greater than 1,000 W peak
3
SC-2 or SC-3 required for DSP and outboard electronic crossovers
Two cabinets per channel, mounted within four to five inches of each other
Come Hear It
See and hear this in one of our reference rooms. Walk in or book ahead, in Scottsdale or Tempe.